How to Root & Unroot Samsung Galaxy S5 SM-G900T_5.0_0002

Visit Video on haw to enable:

Enable USB debugging mode on Samsung Galaxy S5
Go to the menu and launch Settings.
Tap on “About Device” menu and then tap on “Build Number” 7 times.
After tapping it for 7 times, you'll now get a prompt that says that you're a developer now.
---------------------------------------------------------------------------------------
Hello Folks I will create the video on how I try to unroot my phone and came up with this - "Unfortunately The Process Com.Android.Phone Has Stopped Error"
but here just to show how enable on your device developer options to enable USB debugging
.....................................
Spend 6hr to Unroot Samsung Galaxy S5 Through Odin - was able to recover some phone numbers and notes, thanks this websites:
http://thedroidguy.com/2015/08/fix-samsung-galaxy-s5-unfortunately-the-process-com-android-phone-has-stopped-error-1047708
http://forum.xda-developers.com/devdb/project/?id=3483#downloads
http://forum.xda-developers.com/showthread.php?t=2697523
https://www.techunblocked.org/2014/12/com-android-phone-has-stopped-fix.html
http://thedroidguy.com/2014/04/how-to-fix-unfortunately-the-process-com-android-phone-has-stopped-90124
http://www.galaxys5update.com/galaxy-s5-stock-firmware/
http://stockroms.net/file/GalaxyS5/SM-G900T/Lollipop/G900TUVU1DOB1_G900TTMB1DOB1_TMB.zip
http://galaxys5root.com/galaxy-s5-stock-firmware/
http://stockroms.net/file/GalaxyS5/SM-G900T/Lollipop/G900TUVU1DOB1_G900TTMB1DOB1_TMB.zip
http://galaxys5root.com/galaxy-s5-stock-firmware/
http://galaxys5root.com/galaxy-s5-unroot/how-to-unroot-galaxy-s5-with-odin-and-stock-firmware/
http://joyofandroid.com/unroot-samsung-galaxy-s5/
https://www.androidfilehost.com/?w=devices&manufacturer=Samsung
http://www.androidofficer.com/2014/04/g900tuvu1anch-android-442-uvu1anch.html
http://wccftech.com/how-to-unbrick-samsung-galaxy-s5/


used this soft:
clockworkmod recovery samsung galaxy s5
aromafm-1.91
aromafm-1.00-120512-002
Odin_v3.09
----------------------
About the phone:
Android version 5.0
Baseband Version G900TUVU1DOB1
Kernel Version
3.4.0-4033351
dpi@SWDD5507 #1
Sat Feb 7 14:13:29 KST 2015
Build Number
LRX21T.G900TUVU1DOB1
SE for Android Status
Enforcing
SEPF_SM-G900T_5.0_0002
Security software version
MDF v1.1 Release 4
VPN v1.4 Release 3
KNOX 2.3
Standard SDK 5.3.0
Premium SDK 2.3.0
Customization SDK 2.0.0
Container 2.3.0
CEP 2.0.1
Enterprise Billing 1.0.0
SE for Android 2.2.1
SSO 2.1.1
TIMA 3.0
VPN 2.2.0

How to Disable Water Damage Po-pups on the Galaxy S5

The Samsung Galaxy S5 is a powerful flagship smartphone that combines most of the latest mobile technology all into one impressive device. When it first debuted back in February one of the biggest and best features was the IP67 certification. This makes the Galaxy S5 both dust and water-resistant.

According to Samsung the Galaxy S5 can be submerged in roughly 1 meter of water for over 30 minutes without causing any issues, but many water tests on YouTube shows it can handle deep waters for hours and hours, and come out working just fine.

Read: How to Take a Screenshot on the Galaxy S5

Making the smartphone IP67 dust and water-resistant was an awesome move, as we’ve all surely lost a phone to water or the toilet, or know someone else who has. While we love this new feature with the Samsung Galaxy S5, there are a few popups to “remind” users they need to take a few steps to secure the device. They’re extremely annoying, but you can get rid of them.

IMAGES

In order to let users fully understand that they MUST cover the charging port or tightly snap on the back cover for the water-resistant features to work, Samsung’s integrated some large and intrusive popup messages on the device. Every single time you unplug your Galaxy S5 from the charger the popup appears, often times after you’ve turned off the screen. Which means it wakes the device just to annoy users and remind them to cover the charging port.

The same popup also appears each and every single time a user reboots his or her smartphone. As you can see in the image above, they’re quite large, and you can’t miss them. Surely you all know what I’m talking about.

We have some bad news. If you own the Samsung Galaxy S5 on AT&T or T-Mobile, these popups won’t be going away anytime soon, and you’ll be annoyed by them every darn time you charge your smartphone. However, Sprint and Verizon let you hide these obnoxious messages.

Instructions

I don’t know about you guys, but I don’t need to be told more than once or twice that I need to do this to ensure my $600 phone doesn’t get ruined. Let along every single time I charge it. That’s often multiple times a day. Thanks for the 150 reminders Samsung.

If you own the Samsung Galaxy S5 on Verizon or Sprint you can remove these popups. Most users without even paying attention already probably did this, but once they popup after you unplug the charger or reboot simply scroll down and select the “don’t show this message again” box. That’s it. You’ll never be reminded by these annoying popups again.

Read: How to Root the Samsung Galaxy S5

Sadly if you’re like me and have an AT&T or T-Mobile Galaxy S5, you’re stuck with these messages each and every single day, unless you hack your Galaxy S5. Users wanting to take some extreme steps can root the Galaxy S5 using the guide above provided at XDA Developers, install the Xposed framework, then download what’s called the Xposed G-TouchWiz Mod from the Google Play Store, and hide the popups that way. The video below explains it all.

As you can see from the video above, hiding these messages is rather easy for some tech savvy users, but average owners may want to avoid this. You’ll have to root your device (which may void your warranty) download a few additional files from unknown sources and install them, then get the app from the Play Store to manage your device.

These steps aren’t recommended for beginners, as some of the changes could potentially harm your device if you aren’t careful. It’s worth reading up on how Xposed Framework mods work on Android smartphones, then proceeding with caution.

That’s it. If you’ve followed all the steps mentioned above you should now have access to hide these annoying popups on your Galaxy S5 from AT&T or T-Mobile.

Root Samsung Tab 3 SM-T210 and SM-T210R on 4.4.2

How to Root Samsung Tab let  3 SM-T210 and SM-T210R on 4.4.2

How to Root Android KitKat 

Step by Step Tutorial . 

What does Rooting means in Android OS ?

In the era of smartphones and Android Tablets ,  we listen every day a word "Root or Rooting" along with Android Smartphone and Android Tablets names. I was confused also for long time to understanding completely what is Rooting. Still not be able to define it perfect but as much as i know I would like to share it to newbies. 

How Does "Root" works ?

Android OS based on Linux Operating System. The name of admin in Linux is Root. Root or Rooting mean in Android language is like you have to access everywhere , where unrooted cannot access or by default OS does not allow to access . Rooting give you access to system files and allow you to change those files which are read only like you can play into system file , you can install custom OS on your Smartphone or Tablet. Rooting or Root remove all the instruction on device,  this is a same process as Jailbreaking on  Iphone or Ipad. if you are  familiar with windows, its exact as you use your computer as a ADMIN or as a user. Rooting is ADMIN and unrooted is like guest user. To understand Rooting in simple way, for example "  you go to  someone 's house as a guest . You will be restricted to guest room only or TV lounge . When you get permission (Root) you can access to all their room , kitchen , basement , etc ." in conclusion,  a rooting is we replace official kernel with new kernel ,which allow you to do a lot more, than the original kernel. 

Simply understanding Rooting .

Root is also known as a base folder of your microSD card. a main feature of rooting is you can have all those games on your phone which is very expensive on Android Market. for example i have unrooted Samsung S3 mini and I cannot connect OTG cable with it. When i rooted S3 Mini i was able to find OTG cable .When you get root access you , you can remove carrier restriction as well as can make full backup of your phone to microSD card which called nandriod backup. 

This method will work on Samsung Tab 3 SM-T210 and SM-T210R . You should know the difference between 3G and WIFI based Samsung tablets.

1) CHARGE YOUR TABLET AT LEASE TO 75%

GET

 Odin 3.09 .

GET

 T210.TWRP.2.8.0.0.tar.md5

GET

 Update SuperSU . 

 Copy UPDATE SUPERSU to the root directory of your tablet internal or external memory.

How to Root Samsung Tab let 3 SM-T210.

Turn on your Samsung tablet into Download Mode by pressing volume down + home + power button. Connect with computer .open Odin and let it select com . 

When you see "Added " on Odin , click on AP|PDA and select T210.TWRP.2.8.0.0.tar.md5 File . 

Click Start to upload TWRP . 

After completing installation , a PASS!/RESET! message  will appear and galaxy tab will be rebooted. 

You have successfully install TWRP Recovery on your tablet, but you are not done yet. 

Turn off tablet and turn on into Recovery mode by pressing Volume UP  + Home + Power . You will be redirected to TWRP Recovery .

Click on Install and select UPDATE SUPERSU from tablet  internal or external memory 

Slide confirmation slider button to flash SUPERSU on your galaxy tablet . 

When done reboot your tablet by click Reboot --System . 

Tablet will be reboot and SUPERSU icon will appear . 

================================================================

Thanks all this duds:

Support my efforts, get SuperSU Pro !

Follow me on Google+
Download UPDATE-SuperSU-v2.37.zip

http://www.androidsoldier.com

How to Pair the Camera with the GoPro App

HERO4 pairing process

Here you can obtain softwares and apps

Pairing HERO4 Black or HERO4 Silver with the GoPro App for the First Time

1. Open the GoPro App and complete these steps:
   • Tap "Connect Your Camera.”
   • Tap "Add New Device.”
   • Tap "HERO4.”
2. On your camera, complete these steps:
   • Press the mode button to power on your camera. 
   • Press the mode button until you see "Setup.”
   • Press the shutter button to open "Setup.”
3. On the app, tap Continue.
4. On the camera, complete these steps:
   • Press the shutter button twice to turn on Wi-Fi.
   • Press the mode button to highlight “Pair,” then press the shutter button to select it.
5. On the app, tap Continue.
6. On the camera, press the shutter button to select "GoPro App."
7. On the app, complete these steps:
   • Tap “Continue.”
   • Enter the PIN that is listed on the camera's LCD screen, then tap “Pair.”
   • Enter a name and password for your camera.
   • Tap “Update Your Camera.”
8. For iOS users: Go to Settings > Wi-Fi on your phone and select your camera name, enter the password, then return to the app.
9. Tap your camera name to connect to the camera’s Wi-Fi network.

Pairing HERO4 Black or HERO4 Silver with the GoPro App on Additional Devices

1. Open the GoPro App and complete these steps:
   • Tap "Connect Your Camera.”
   • Tap "Add New Device.”
   • Tap "HERO4.”
2. On your camera, complete these steps:
   • Press the mode button to power on your camera. 
   • Press the mode button until you see "Setup.”
   • Press the shutter button to open "Setup.”
3. On the app, tap Continue.
4. On the camera, complete these steps:
   • Press the shutter button twice to turn on Wi-Fi.
   • Press the mode button to highlight “Pair,” then press the shutter button to select it.
5. On the app, tap Continue.
6. On the camera, press the shutter button to select "GoPro App."
7. On the app, complete these steps:
   • Tap “Continue.”
   • Enter the PIN that is listed on the camera's LCD screen, then tap “Pair.”
   • Tap “Continue” to use the camera’s current name and password.
8. For iOS users: Go to Settings > Wi-Fi on your phone and select your camera name, enter the password, then return to the app.
9. Tap your camera name to connect to the camera’s Wi-Fi network.

HERO4 Session Pairing process

iOS: 

Connecting HERO4 Session with the GoPro App for the First Time: iOS Device

If your HERO4 Session has never been paired with the GoPro App on any smartphone/tablet, follow the instructions below to connect your camera to the app.

1. On your smartphone/tablet, complete these steps:
   1. Download the GoPro App to your smartphone/tablet from the Apple® App Store.
   2. Open the app, then tap Connect Your Camera.
   3. Tap Add New Device, then tap HERO4 Session.
   4. Because this camera has never been paired with the app on any device, tap Yes.
2. On HERO4 Session, complete these steps:
   1. Press the Info/Wireless button to open the wireless menu.
   2. Press the Info/Wireless button again to cycle to APP, then press the Shutter/Select button to select it.
3. On your smartphone/tablet, complete these steps:
   1. Tap Continue.
   2. Enter the PIN displayed on your camera status screen, then tap Pair.
   3. Create a new camera name and password, then tap Continue.
   4. Go to Settings on your device, select the camera from the list of Wi-Fi options, then return to the GoPro App. Your camera now appears with a blue dot next to it, meaning that it is connected to the app.
   5. Tap the name of your camera.

You can now control your camera with the app.

Connecting HERO4 Session with the GoPro App on an Additional iOS Device

If your HERO4 Session has already connected to the GoPro App on a smartphone/tablet or has already been paired with a GoPro remote, follow the instructions below to connect your camera to the app on a different smartphone/tablet. 

1. On your smartphone/tablet, complete these steps:
   1. Download the GoPro App to your smartphone/tablet from the Apple® App Store.
   2. Open the app, then tap Connect Your Camera.
   3. Tap Add New Device, then tap HERO4 Session.
   4. Because this camera has already been paired with the app on another device, tap No.
2. On HERO4 Session, complete these steps:
   1. Press the Info/Wireless button to open the wireless menu.
   2. Press the Info/Wireless button repeatedly to cycle to ADD NEW, and then press the Shutter/Select button to select it.
   3. Press the Shutter/Select button again to select APP. The camera goes into pairing mode.
3. On your smartphone/tablet, complete these steps:
   1. Tap Continue.
   2. Enter the PIN displayed on your camera status screen, then tap Pair.
   3. Tap Continue to save the camera’s current name and password.  Note: If you change your camera’s name and password in this screen, you’ll have to re-pair your camera with any other device it was paired to.
   4. Go to Settings on your device, select the camera from the list of Wi-Fi options, then return to the GoPro App. Your camera now appears with a blue dot next to it, meaning that it is connected to the app.
   5. Tap the name of your camera.

You can now control your camera with the app.

Android:

Connecting HERO4 Session with the GoPro App for the First Time: Android Device

If your HERO4 Session has never been paired with the GoPro App on any smartphone/tablet, follow the instructions below to connect your camera to the app. 

1. On your smartphone/tablet, complete these steps:
   1. Download the GoPro App to your smartphone/tablet from Google Play.
   2. Open the app, then tap Connect Your Camera.
   3. Tap Not Connected.
   4. Tap Add New Device, then tap HERO4 Session.
   5. Because this camera has never been paired with the app on any device, tap Yes.
2. On HERO4 Session, complete these steps:
   1. Press the Info/Wireless button to open the wireless menu.
   2. Press the Info/Wireless button again to cycle to APP, then press the Shutter/Select button to select it.
3. On your smartphone/tablet, complete these steps:
   1. Tap Continue.
   2. Enter the PIN displayed on your camera status screen, then tap Pair.
   3. Create a new camera name and password, then tap Continue.

You can now control your camera with the app.

  

Connecting HERO4 Session with the GoPro App on an Additional Device: Android

If your HERO4 Session has already connected to the GoPro App on a smartphone/tablet or has already been paired with a GoPro remote, follow the instructions below to connect your camera to the app on a different smartphone/tablet. 

1. On your smartphone/tablet, complete these steps:
   1. Download the GoPro App to your smartphone/tablet from Google Play.
   2. Open the app, then tap Connect Your Camera.
   3. Tap Not Connected.
   4. Tap Add New Device, then tap HERO4 Session.
   5. Because this camera has already been paired with the app on another device, tap No.
2. On HERO4 Session, complete these steps:
   1. Press the Info/Wireless button to open the wireless menu.
   2. Press the Info/Wireless button repeatedly to cycle to ADD NEW, and then press the Shutter/Select button to select it.
   3. Press the Shutter/Select button again to select APP. The camera goes into pairing mode.
3. On your smartphone/tablet, complete these steps:
   1. Tap Continue.
   2. Enter the camera’s password, then tap Continue.
   3. Enter the PIN displayed on your camera status screen, then tap Pair.

You can now control your camera with the app.

HERO+ LCD Pairing process

Pairing HERO+ LCD with the GoPro App for the First Time

If your HERO+ LCD has never been paired with any smartphone/tablet, follow the instructions below to pair the two devices. 

1. On your smartphone/tablet, complete these steps:
   1. Download the GoPro App to your smartphone/tablet from the Apple® App Store, Google Play, or Windows® Phone marketplace.
   2. Open the app.
   3. Tap Connect Your Camera.
   4. Tap Add New Device.
   5. Tap HERO+.
2. On the camera, complete these steps:
   1. Press the Power/Mode button to power on your camera.
   2. Press the Power/Mode button repeatedly to cycle to Setup.
   3. Press the Shutter/Select button twice to open the Wireless menu.
3. On your smartphone/tablet, tap Continue.
4.      On the camera, press the Power/Mode button to highlight GoPro App, then press the Shutter/Select button to select it. Your camera is now in pairing mode.
5. On your smartphone/tablet, complete these steps:
   1. Tap Continue.
   2. Tap Continue again.
   3. Enter the PIN displayed on your camera’s status screen, and then tap Pair.
   4. Create a new camera name and password.
   5. If you are using the app on an iOS device, go to Settings on your device, select the camera from the list of Wi-Fi options, and then return to the GoPro App.
   6. Tap the name of your camera.

You can now control your camera with the app.

Pairing HERO+ LCD with the GoPro App on an Additional Device

If your HERO+ LCD was already paired to a smartphone/tablet using the GoPro App, follow the instructions below to pair your camera to a different smartphone/tablet.

1. On your smartphone/tablet, complete these steps:
   1. Download the GoPro App to your smartphone/tablet from the Apple® App Store, Google Play, or Windows® Phone marketplace.
   2. Open the app.
   3. Tap Connect Your Camera.
   4. Tap Add New Device.
   5. Tap HERO+.
2. On the camera, complete these steps:
   1. Press the Power/Mode button to power on your camera.
   2. Press the Power/Mode button repeatedly to cycle to Setup.
   3. Press the Shutter/Select button twice to open the Wireless menu.
3. On your smartphone/tablet, tap Continue.
4. On the camera, complete these steps:
   1. Press the Power/Mode button to highlight GoPro App, then press the Shutter/Select button to select it.
   2. Press the Power/Mode button to highlight New, then press the Shutter/Select button to select it. Your camera is now in pairing mode.
5. On your smartphone/tablet, complete these steps:
   1. Tap Continue.
   2. Tap Continue again.
   3. Enter the PIN displayed on your camera’s status screen, and then tap Pair.
   4. If you do not want to change the camera name and password, tap Continue. Otherwise, enter a new name and password, and then tap Continue.  Note: If you enter a new name and password for your camera, you must later re-pair your camera with any other smartphone/tablet that it was already paired to.
   5. If you are using the app on an iOS device, go to Settings on your device, select the camera from the list of Wi-Fi options, and then return to the GoPro App.
   6. Tap the name of your camera.

You can now control your camera with the app.

HERO3/3+ pairing process

1. Power ON your camera.
2. Press the small Wi-Fi button on the left side of the camera as the lens is facing you.
3. Press the small Wi-Fi button again and look at the camera’s LCD screen to see the Wi-Fi menu. Now press the Shutter button.
4. Press the camera’s front Power button to highlight “GoPro App”.
   • Note – if you don’t see “GoPro App” in the menu along with “Wi-Fi RC”, then you need to update your camera’s software before you can use the GoPro App. You can update your HERO3 software here: http://gopro.com/update.
5. Press the camera’s top Shutter button to select “GoPro App”. 
6. In your smart phone or tablet’s Wi-Fi Network settings menu, connect to the camera’s Wi-Fi network. You should find the name of your camera listed in your available Wi-Fi networks for you to select. By default, the name will be something like “GOPRO-BP-….”. The default password is “goprohero”.
7. Once connected to your camera’s Wi-Fi network, open the GoPro App on your phone or tablet.
8. Tap “CONNECT + CONTROL”.

HD HERO2 + Wi-Fi BacPac GoPro App pairing process

To pair your GoPro camera with the GoPro App, please follow these steps:

1. Power on your camera.  With both units already powered on, attach the Wi-Fi BacPac to the HD HERO2 camera.
2. Press the Wi-Fi button on the side of the camera or Wi-Fi BacPac to go to the Wi-Fi menu. 
3. Select “PHONE & TABLET”. This allows your phone or tablet to connect to the camera's Wi-Fi network so that you can control the camera.
4. In your smart phone or tablet’s Wi-Fi Network settings, connect to the camera's Wi-Fi network. You should find the name of your camera/BacPac listed in your available Wi-Fi networks for you to select. By default, the name will be something like “GOPRO-BP-….”. The default password is “goprohero”.
   • You can change the name and password of their Wi-Fi BacPac any time in GoPro Studio’s Device Window.  The password must be 8-63 characters long. It can contain upper and lower case letters, numbers 0-9, and symbols "@", "-", and "_".
5. Once connected to your camera’s Wi-Fi network, open the GoPro App on your phone or tablet.
6. Tap “CONNECT + CONTROL”. 

Still having trouble getting connected?

You may want to try changing your Wi-Fi Name and Password. If you want to change your camera's Wi-Fi Name and Password, you can follow the instructions in this article:

How to Change Your Camera's Wi-Fi Name & Password

Manufacturer Video Tutorial: HERO4 Pairing Video
Or go to buy one

50 Youtube Videos

My Youtube room tour- click on the thing that says "My Youtube" for my youtube account  hair tutorial makeup tutorial 50 things about me  sibling tag mall haul clothing collection summer clothes favorites  how I edit... what is on my phone back to school haul tags morning routine  sports talk/ workout Q&A unboxing video what I got for... giveaway challenges tutorials holiday hauls 10 things I do when I am bored what's in my bag how to... commenting on comments day in a life of me what guys or girls do that is annoying best songs best movies nighttime routine  what annoys me room décor ideas my reaction to old videos draw my life  music videos vlogs recent events  rant video shoutout video  slideshow  best... whats in my... favorite youtube videos gameplay who are you battle scars reactions to subscribers  make a video about a video

Warning! Your PayPal account was limited!

What is Spoof?

A spoof or phishing (pronounced "fishing") email is an email that is designed to look like it comes from a well-known company and that tells some story to get you to click a link or button in the email.

The links or buttons in the email take you to a website that is also called a "spoof" because it, too, fakes the appearance of a popular website or company. The spoof site asks you to input personal information, such as your credit card number, Social Security number or account password. 

You think you are giving information to a trusted company, when in fact, you are supplying it to a criminal.

Common deceptive tactics of spoof emails and websites.

The following pages will help you prevent falling for a spoof email and protect your account. The lessons learned here can be applied not only on PayPal, but wherever you do business online.

Think an email is a spoof? Forward it to spoof@paypal.com.

Example:

Header:

----- Forwarded Message -----
From Support PayPal Thu Aug 27 15:09:16 2015X-Apparently-To: xxxxxxxx@yahoo.com; Thu, 27 Aug 2015 15:09:19 +0000Return-Path: <nobody@scuderia.turboservers.com.au>Received-SPF: none (domain of scuderia.turboservers.com.au does not designate permitted sender hosts) YXNlIGRvIG5vdCByZXBseSDCoMKgIEluZm9ybWF0aW9uIGFib3V0IHlvdXIg YWNjb3VudCA6IFdhcm5pbmchIFlvdXIgUGF5UGFsIGFjY291bnQgd2FzIGxp bWl0ZWQhIFlvdXIgYWNjb3VudCBoYXMgYmVlbiBsaW1pdGVkIHRlbXBvcmFy aWx5IGluIG9yZGVyIHRvIHByb3RlY3QgaXQuIFRoZSBhY2NvdW50IHdpbGwg Y29udGludWUgdG8gYmUgbGltaXRlZCB1bnRpbCBpdCBpcyBhcAEwAQEBAQ--X-YMailISG: i78U_IUWLDsBeY6LUkiwkQ0ra_fpWANyz7IPfyA3KRLpl3i9 PUNoBQXo5j3fiCqgCK7vuxC1ufbjmqO7z34TGJohKjbJseqQSc99EmJCbu4v v5DfhzqX68Iv5uOL8oj99DBKZQ2Dv65aaLQZ397vklFRuPSucO_wOjDFjdgr P6YB2.31Kdrz6JwPWmGEhFecl.ex2R7mjZKtTgInqGiP.0gdvu0RXy0aBahU YB7fFoTgaPVdPOq7OiUVt_Yz486eMxAM_QBiifmDOv84lN_NxRimBO.CzVL3 EOdkRrHEOK9VF_LHodX1kp0W6XN_h8oHYuVz..0JwwIh1hoPUgOgaAdrrJtu faj_.T_EPW2JRke83v1B_qPNZhn7jPOmAqfa8ae9oP7vj.SdzYlfHSkqmu92 _VAHv1MY9o.cKOOWJttvErSVvjOBP8CuK4NxCSSULZMODpHdFyMcV18BrD5P nLiXeCxnWZTcwI696Feq3rgrBCD4iVbstay5bAqcO0W.jowQJKKU73H6fXHX cZjecRX9125F9uttLh3IVCQ2bjHIcUJ8ajffW5HCxHcYNRRsII8XIMmRVAie W7OKsisHUqsNx.EOHWSYVsoc_FbxpxW6Q_X4ji9VQ3zhecA7BA402KACxy5b G8Ga995uOLcRJqf5GKK_voH2n1.WD2PeoHs5dtD2sPMMIhx9VZDudMi3DSZ1 tHPNmA4pYRHoUkhyA.QbezQt6Yco62LPkwsZ3pV3LAYA5rnQCwEdbQWSWrkw 7EX6b3jJqdMMbG3WHTGkF1ijIHx6sXZBcBzK2UtCT1zGUck_ad_VmwbwpHyt h33VDaWck.J3Tbh5nC3gIvKcWnpl8wCYT.Whi6_No2r5WRL6LueoUTKd8KCy aO8xZrQpXMyPs613LW48_GGg9Aa5.GgSGs2pE0oKqAZl6uCDtu6f_dvTp0MG n5MNMQakCUg8aO6o8EfXndnIiFdFkAMgqi9NXvBmOYE86zUBexIsNn_qsdjX 86oqN.egJkktJxLMK.GGfBNWm8yXjcrQXGek7yVe3v9pBj93m1wITBikJR6o H3TstXdfM91v26EfCrQNdgGHGleqqJhgTid109u7jN.LwAUdk33C4.jqtHu_ 7AFMCRz3p6tEQjA5kLC8xlV6GC44LEjsyhe.p5LNRTAMf9YxFD5fk.TI8MXb zEgeusfvW9bjuDIYARwKB9XuFrUn4MwdRmu6FZT6PsUw1AiYCIbG8aEZcHPq NITWWoPujdkPnDl900Ue1tEqkrswKQ1WGdh6jNM9C.qoh6uIyA6lcl5MZTc5 sfsU2X.ZlH5ODqydxAuw875QBpVAVHkS2Bp2.fctia9_X-Originating-IP: [122.201.93.135]Authentication-Results: mta1383.mail.gq1.yahoo.com  from=support.com; domainkeys=neutral (no sig);  from=support.com; dkim=neutral (no sig)Received: from 127.0.0.1  (EHLO scuderia.turboservers.com.au) (122.201.93.135)  by mta1383.mail.gq1.yahoo.com with SMTPS; Thu, 27 Aug 2015 15:09:18 +0000Received: from nobody by scuderia.turboservers.com.au with local (Exim 4.69) (envelope-from <nobody@scuderia.turboservers.com.au>) id 1ZUynk-00077o-1u for xxxxxxxxxxxxxxxx@yahoo.com; Fri, 28 Aug 2015 01:09:16 +1000To: xxxxxxxxx@yahoo.comSubject: [Warningl ] Your PayPal Account Has Been Suspended =?utf-8?Q?=E2=9C=94?=X-PHP-Script: scuderia.turboservers.com.au/~aquapro/morpema/spa.php for 41.248.33.19From: Support PayPal <inc.paypal@support.com>Reply-To: inc.paypal@support.comMIME-Version: 1.0Content-Type: text/htmlContent-Transfer-Encoding: 8bitMessage-Id: <E1ZUynk-00077o-1u@scuderia.turboservers.com.au>Date: Fri, 28 Aug 2015 01:09:16 +1000X-AntiAbuse: This header was added to track abuse, please include it with any abuse reportX-AntiAbuse: Primary Hostname - scuderia.turboservers.com.auX-AntiAbuse: Original Domain - yahoo.comX-AntiAbuse: Originator/Caller UID/GID - [99 32002] / [47 12]X-AntiAbuse: Sender Address Domain - scuderia.turboservers.com.auX-Source: X-Source-Args: /usr/local/apache/bin/httpd -DSSL X-Source-Dir: vinidexaquapro.com.au:/public_html/morpemaContent-Length: 12104From: Support PayPal <inc.paypal@support.com>To: xxxxxxxxxxxx@yahoo.com Sent: Thursday, August 27, 2015 8:09 AMSubject: [Warningl ] Your PayPal Account Has Been Suspended ✔

Support PayPal

• Today at 8:09 AM

To

• xxxxxxxxxxx@yahoo.com

PayPal This is an automated email, please do not reply

Information about your account : Warning! Your PayPal account was limited! Your account has been limited temporarily in order to protect it. The account will continue to be limited until it is approved. Once you have updated your account records, your information will be confirmed and your account will start to work as normal once again. The process does not take more than 5 minutes. Once connected, follow the steps to activate your account. We appreciate your understanding as we work to ensure security. Click here to Confirm Your Account Information.

Note: We have a problem with servers, if you have received this message in Folder SPAM (JUNK ) move it to your inbox to unlock the link. Department review PayPal accounts

Suggestion!

 Do not click on any links in this email, just Forward it to spoof@paypal.com.

How To Unlock Samsung Galaxy S5 AT&T - All networks supported, SM-G900T,...

Durable Greenhouses made from Polycarbonate UV Protected material and Aluminum

ALSO PLEASE VISIT THIS VIDEOS AND SEE IF YOU FIND SOMETHING NEED:

Windows Registry Tools can be downloaded here: 

How to kip your PC Private by deleting DATA Permanently 

http://askpctech.blogspot.com/2016/03/kip-your-pc-privat.html

This tutorial is made up on request several  users, is well is fallowing video:

1)How to Delete Paint Recent Pictures from List in Windows 7 

2)Win 7– Fix for “Safely Remove Hardware and Eject Media” not working How To

3)Windows 10 How to Fix Black Screen After Booting

4)How To Remove Windows 10 Upgrade Notification On Windows 7 And Windows 8

5)How to Delete Face book Page Permanently - 2015

6)How to Uninstall Windows 10 and Downgrade to Windows 7 or 8.1

7)detected: not-a-virus:remoteadmin.win32

8)How to change pictures into icons for folders

9)Speed up your PC Disable System Restore on SSD

10)Speed up your PC Disable Scheduled De-fragmentation SSD

11)2015 Black screen of DEATH Windows 7 & 8 - with cursor at start-up SOLVED

12)Upon start up only wallpaper shows FIX

13)Here is video on Windows 7 & 8 - Black screen with cursor at start-up FIX 

You can also open Task Manager by pressing Ctrl+Shift+Esc.

14) I bought a windows 7 PC but it Look alike old PC FIX:

15) Windows 7 & 8 - Black screen with cursor at start-up FIX:

16) How To Fix Minecraft OpenGL Error Windows 7 xp vista 720p :

17) removing bars using regscanner regedit & file shredder 720p:

18) How to Recover windows Explorer from error 2014 720p

19) HOW TO Save on battery online 

20) Windows 7 & 8 - Black screen with cursor at start-up FIX 

Upon start up only wallpaper shows no icons

CTL+ALT+DEL then click file and new task. then type explorer.exe and press ok

Best Greenhouse system 2015